 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TC7WBD126FK TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC7WBD126FK Dual Bus Switch with Level Shift The TC7WBD126FK is a low on-resistance, high-speed CMOS 2-bit bus switch. This bus switch allows the connections or disconnections to be made with minimal propagation delay while maintaining Low power dissipation which is the feature of CMOS. When output enable (OE) is at High level, the switch is on; when at Low level, the switch is off. The internal diode which adds to power supply line is enable to realize the shift of signal level from 5 V to 3.3 V. (Note 1) All inputs are equipped with protector circuits to protect the device from static discharge. Features * * * * * * Operating voltage: VCC = 4.5~5.5 V High speed operation: tpd = 0.25 ns (max) Ultra-low on resistance: RON = 5 (typ.) Electro-static discharge (ESD) performance: 200 V or more (JEITA) 2000 V or more (MIL) TTL level input (control input) Package: US8 Weight: 0.01 g (typ.) Note 1: In case that over-shoot noise is detected, this device should be used with clamp diode to prevent the next stage device from over-stress. Pin Assignment (top view) VCC OE2 8 7 B1 6 A2 5 WBD 126 1 2 OE1 A1 3 4 B2 GND 1 2001-12-04 TC7WBD126FK Truth Table Inputs OE L H Function Disconnect A port = B port System Diagram A1 B1 A2 B2 OE1 OE2 Maximum Ratings Characteristics Power supply range DC input voltage DC switch voltage Input diode current Continuous channel current Power dissipation DC VCC/GND current Storage temperature Symbol VCC VIN VS IIK IS PD ICC/IGND Tstg Rating -0.5~7.0 -0.5~7.0 -0.5~7.0 -50 128 200 100 -65~150 Unit V V V mA mA mW mA C Recommended Operating Conditions Characteristics Supply voltage Input voltage Switch voltage Operating temperature Input rise and fall time Symbol VCC VIN VS Topr dt/dv Rating 4.5~5.5 0~5.5 0~5.5 -40~85 0~10 Unit V V V C ns/V 2 2001-12-04 TC7WBD126FK Electrical Characteristics DC Characteristics (Ta = -40~85C) Characteristics "H" level Input voltage "L" level High-level output voltage Input leakage current Power off leakage current Off-state leakage current (switch off) ON resistance (Note 3) RON ISZ Symbol VIH VIL VOH IIN IOFF Figure 4 VIN = 0~5.5 V A, B, OE = 0~5.5 V A, B = 0~5.5 V, OE = GND IIS = 30 mA IIS = 64 mA Test Condition VCC (V) 4.5~5.5 4.5~5.5 4.5~5.5 0 4.5~5.5 4.5 4.5 4.5 Switch ON Switch OFF (Note 4) 5.5 5.5 5.5 Min 2.0 Typ. (Note 2) 5 5 35 Max 0.8 1.0 1.0 1.0 7 7 50 1.5 10 2.5 mA A mA A A A Unit V VIS = 0 V VIS = 2.4 V, IIS = 15 mA Quiescent supply current ICC ICC VIN = VCC or GND IOUT = 0 VIN = 3.4 V (one input) Note 2: Typical values are at VCC = 5 V and Ta = 25C. Note 3: Measured by the voltage drop between A and B pins at the indicated current through the switch. On resistance is determined by the lower of the voltages on the two (A or B) pins. Note 4: Quiescent supply current at VCC = 3.4 V will be sum of ICC and ICC. AC Characteristics (Ta = -40~85C) Characteristics Propagation delay time (bus to bus) Output enable time Symbol tpLH tpHL tpZL tpZH Output disable time tpLZ tpHZ Figure 1, Figure 3 4.5 5.5 ns Figure 1, Figure 3 4.5 4.5 ns Test Condition Figure 1, Figure 2 (Note 5) VCC (V) 4.5 Min Max 0.25 Unit ns Note 5: The propagation delay time is calculated by the RC (on-resistance and load capacitance) time constant. Capacitive Characteristics (Ta = 25C) Characteristics Control pin input capacitance Switch terminal capacitance Symbol CIN CI/O OE = GND Test Condition (Note 6) (Note 6) VCC (V) 5.0 5.0 Typ. 3 10 Unit pF pF Note 6: This parameter is guaranteed by design. 3 2001-12-04 TC7WBD126FK AC Test Circuit Open 7.0 V GND Measure CL = 50 pF RL = 500 CL RL Switch RL Parameter tpLH, tpHL tpLZ, tpZL tpHZ, tpZH Switch Open 7.0 V Open Output Figure 1 AC Waveform tr 2.5 ns Input (A, B) tf 2.5 ns 90% 1.5 V 10% 3.0 V GND Output (B, A) tpLH VOH 1.5 V tpHL VOL Figure 2 tpLH, tpHL tr 2.5 ns Output Enable (OE) tpLZ Output (A, B) Low to Off to Low tpHZ tf 2.5 ns 90% 1.5 V 10% tpZL 3.5 V 1.5 V VOL + 0.3 V VOH - 0.3 V 1.5 V GND tpZH VOL VOH 3.0 V GND Output (A, B) High to Off to High Outputs enabled Outputs disabled Outputs enabled Figure 3 tpLZ, tpHZ, tpZL, tpZH 4 2001-12-04 TC7WBD126FK VOH - VCC Characteristics (typ.) 4.5 4.5 (V) 4.0 100 A 6 mA 12 mA 24 mA (V) Ta = 85C Ta = 25C 4.0 100 A 3.5 6 mA 12 mA 24 mA High-level output voltage VOH 3.5 3.0 High-level output voltage VOH 5.75 3.0 2.5 2.5 2.0 2.0 1.5 4.50 4.75 5.00 5.25 5.50 1.5 4.50 4.75 5.00 5.25 5.50 5.75 Power supply voltage VCC (V) Power supply voltage VCC (V) 4.5 (V) Ta = 0C 4.0 100 A 3.5 6 mA 12 mA 24 mA High-level output voltage VOH 3.0 2.5 2.0 1.5 4.50 4.75 5.00 5.25 5.50 5.75 Power supply voltage VCC (V) Figure 4 5 2001-12-04 TC7WBD126FK Package Dimensions Weight: 0.01 g (typ.) 6 2001-12-04 TC7WBD126FK RESTRICTIONS ON PRODUCT USE 000707EBA * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * The products described in this document are subject to the foreign exchange and foreign trade laws. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice. 7 2001-12-04 |
Price & Availability of TC7WBD126FK
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |